C-S4EWM-1909 Dumps 2022 - New SAP C-S4EWM-1909 Exam Questions
Free C-S4EWM-1909 braindumps download (C-S4EWM-1909 exam dumps Free Updated)
NEW QUESTION 31
When you or EWM release a wave to generate warehouse tasks, EWM copies the staging area and the mode of the wave to warehouse task. You can release waves multiple times. For example, if you release a wave, but EWM can only generate some of the required warehouse tasks since there is not enough stock, you can release the wave again at a later point in time.
You can display the log by using the Release Log button. To do so, on the SAP Easy Access screen, choose path from given options.
Please choose the correct answer.
- A. Extended Warehouse Management -> Maintain Waves -> Wave Management -> Work Scheduling
- B. Extended Warehouse Management -> Work Scheduling -> Wave Management -> Maintain Waves
- C. Extended Warehouse Management -> Work Scheduling -> Maintain Waves -> Wave Management
- D. Extended Warehouse Management -> Wave Management -> Work Scheduling -> Maintain Waves
Answer: B
NEW QUESTION 32
What can you do with a storage group? There are 2 correct answers to this question.
- A. Use it to define a logical or physical breakdown of a storage type
- B. Use it in process and layout oriented storage control
- C. Assign it to multiple storage bins
- D. Assign it as an intermediate storage group
Answer: B,C
NEW QUESTION 33
Which inbound processing document is distributed from an SAP ERP system to SAP EWM? Choose the correct answer.
- A. Inbound delivery
- B. Expected goods receipt notification
- C. Expected goods receipt
- D. Advance shipping notification
Answer: B
NEW QUESTION 34
You want to setup tolerance groups to control how physical inventory differences are posted from SAP EWM to SAP ERP using the difference Analyzer. Which parameters control this type of tolerance groups? There are 2 correct answers to this question.
- A. Warehouse number
- B. Value-based tolerance
- C. Percentage quantity based tolerance
- D. Storage type
Answer: B,C
NEW QUESTION 35
Which of the following actions can you perform from shipping cockpit? There are 2 correct answers to this question.
- A. Create waves
- B. Post goods receipts
- C. Assign outbound delivery orders and inbound deliveries to transportation units
- D. Create and check in transportation units
Answer: A,D
NEW QUESTION 36
What are the advantages of using a mobile device during physical inventory ? Note : There are 2 correct answers to this question.
- A. You can use collective counting for bulk storage
- B. It is optional to black bins
- C. There is a special SAP Fiori app available
- D. The stock is immediately corrected in SAP ERP
Answer: A,D
NEW QUESTION 37
Which of the following is prerequisite for assigning a warehouse order to a resource? Choose the correct answer.
- A. The resource group of the resource must be assigned to the warehouse order creation rule
- B. The creation of pick handling unit must be done automatically with a packaging specification
- C. The warehouse order must be in a queue with the same operating environment as the resource
- D. The warehouse order must be picked from the same activity area that is assigned to resource
Answer: C
NEW QUESTION 38
In EWM a warehouse is identified by the: Please choose the correct answers.
- A. Warehouse complex code
- B. Warehouse Number
- C. StorageType
- D. Warehouse organization code
Answer: B
NEW QUESTION 39
Which two of the following types of labor time are tracke in Labor management? There are 2 correct answers to this question.
- A. Indirect Labor
- B. Unproductive Time
- C. Direct Labor
- D. Schedule Time
Answer: A,C
NEW QUESTION 40
What determines the source bin of a product in an inbound delivery ? Note : There are 2 correct answers to this question
- A. Warehouse task
- B. Storage process
- C. Warehouse process type
- D. Staging area and door determination
Answer: C,D
NEW QUESTION 41
Which of the following is not part of Warehouse Structural Elements? Please choose the correct answer.
- A. Yard
- B. Storage bin
- C. Activity area
- D. Storage type
Answer: A
NEW QUESTION 42
What putaway parameters can the slotting process determine? There are 3 correct answers to this question.
- A. Storage type
- B. Bin type
- C. Activity area
- D. Storage section
- E. Activity type
Answer: A,B,D
NEW QUESTION 43
What are some of the characteristics of QIE? There are 3 correct answers to this question.
- A. A number of inspection object types have been pre-defined by SAP for use in EWM.
- B. QIE is a component of EWM.
- C. QIE can be run in a decentralized mode.
- D. QIE supports the counting function in EWM.
Answer: A,C,D
NEW QUESTION 44
Sometimes it is required to include the actual invoice in the shipment when it leaves the warehouse. For a direct outbound delivery, especially for a pickup process where you want the buyer to pay immediately, you might want to issue the invoice before you post the goods issue (which would normally trigger the invoice print).
For these cases, you can use the "invoice before goods issue" process to create and print the invoice before the goods issue is posted. Which statements are not correct given below. There are 2 correct answers to this question.
- A. If you want to print invoices for the contents of a vehicle or transportation unit, EWM triggers the invoice printout in CRM billing or ERP billing by sending the message Print Invoice Document.
- B. For single requests from EWM, CRM billing or ERP billing directly creates single invoices that you can change
- C. If you want to print invoices for the contents of a vehicle or transportation unit, EWM triggers the invoice printout in CRM billing or ERP billing by sending the message Print Billing Document.
- D. For single requests from EWM, CRM billing or ERP billing directly creates single invoices that you cannot change
Answer: A,B
NEW QUESTION 45
Which parameters indicates the type of goods movement when you define a new warehouse process type?
Please choose the correct answer.
- A. warehouse process category
- B. availability group
- C. activity
- D. storage process
Answer: A
NEW QUESTION 46
In the SAP ERP system, the two organizational units used to determine the EWM warehouse are the:
There are 2 correct answers to this question.
- A. Storage Location
- B. Company Code
- C. Supply chain unit
- D. StorageType
- E. Plant
Answer: A,E
NEW QUESTION 47
Which of the following are internal goods movements? There are 3 correct answers to this question.
- A. Replenishment
- B. Ad hoc movement
- C. Direct putaway
- D. Warehouse Reorganization
- E. Slotting
Answer: A,B,D
NEW QUESTION 48
In the EWM system, go to the IMG and determine the Logical System number that is assigned to the Client Number assigned in the ERP server to your course. From where you can get this setting in IMG. Please choose the correct answer.
- A. ERP IMG: Integration with Other mySAP.com Components -> Extended Warehouse Management -> Basic Settings for Setting Up the System Landscape -> Assign Logical System to a Client
- B. ERP IMG: Integration with Other mySAP.com Components -> Basic Settings for Setting Up the System Landscape -> Extended Warehouse Management -> Assign Logical System to a Client
- C. ERP IMG: Integration with Other mySAP.com Components -> Basic Settings for Setting Up the System Landscape -> Extended Warehouse Management -> Assign Logical System to a Client
- D. ERP IMG: Integration with Other mySAP.com Components -> Extended Warehouse Management -> Assign Logical System to a Client -> Basic Settings for Setting Up the System Landscape
Answer: A
NEW QUESTION 49
You need to create warehouse tasks for putaway
Which SAP Extended Warehouse Management document do you use as your reference document ?
- A. Inbound delivery notification
- B. Inbound delivery
- C. Posting change request
- D. Expected goods receipt
Answer: B
NEW QUESTION 50
Where do you enable opportunistic cross-docking ?
- A. In the warehouse and the document type
- B. In the warehouse and the product
- C. In the product and the warehouse process type
- D. In the product and the storage type
Answer: B
NEW QUESTION 51
What do you need to maintain for a capacity check by weight? There are 2 correct answers to this question.
- A. The capacity check in the storage type
- B. The maximum number of bins in warehouse product
- C. The actual weight of the item in work center
- D. The maximum allow weight in the bin
Answer: A,D
NEW QUESTION 52
What options are available for creating physical inventories in EWM? There are 2 correct answers to this question.
- A. Fixed bin directed inventory
- B. Storage type specific inventory
- C. Product specific physical inventory
- D. Storage bin specific inventory
- E. Cycle counting
Answer: C,D
NEW QUESTION 53
An activity area is used to represent a group of: Choose the correct answer(s).
- A. Storage Sections
- B. Storage Bins
- C. Material Staging Areas
- D. Storage types
Answer: B
NEW QUESTION 54
......
C-S4EWM-1909 Exam Certification Details:
| Level: | Associate |
| Duration: | 180 mins |
| Sample Questions: | SAP C-S4EWM-1909 Exam Sample Question |
Verified C-S4EWM-1909 dumps Q&As - Pass Guarantee Exam Dumps Test Engine: https://gocertify.topexamcollection.com/C-S4EWM-1909-vce-collection.html
