We're so confident of our products that we provide no hassle product exchange.
Juniper DX, Associate(JNCIA-DX) Sample Questions:
1. Which command displays the result of a loopback test you executed on a CT3 line module in slot 5, port 0,t1 number 4?
A) show interface 5/0:4/1
B) show interface 5/0:4
C) show controllers t3 5/0:4/1
D) show controllers t3 5/0:4
2. You would like to configure an Ethernet interface with the following characteristics: Fast Ethernet port 3/1 10.10.10.1/24 VLAN 100 Which set configuration commands accurately completes this task?
A) interface fastethernet 3/1 vlan id 100 encap vlan ip address 10.10.10.1.255.255.255.0
B) interface fastethernet 3/1 interface fast 3/1.1 encap vlan vlan id 100 ip address
10.10.10.1.255.255.255.0
C) interface fastethernet 3/1 ip address 10.10.10.1.255.255.255.0 encap vlan vlan id 100
D) interface fastethernet 3/1 encap vlan interface fast 3/1.1 vlan id 100 ip address
10.10.10.1.255.255.255.0
3. When controlling the virtual router assignment for a PPP over ATM client, what mechanism does the router use first?
A) RADIUS server
B) profile
C) domain map
D) DHCP server
4. Hotcerts .com's application requires 30 virtual paths on a four port OC3 card. Which command allows this functionality?
A) atm vcpervp 32768
B) atm vp 30
C) atm vcpervp 30
D) atm vppervc 32768
5. What should you do after you enable Unified Failover?
A) Run configuration synchronization across all members of the Unified Failover group.
B) Manually assign each Unified Failover group member the same VIP.
C) Temporarily set all supported services to the "down" status.
D) Manually run the Appliance Discovery and Failover Protocol.
Solutions:
| Question # 1 Answer: D | Question # 2 Answer: D | Question # 3 Answer: C | Question # 4 Answer: A | Question # 5 Answer: A |
By Len
